How is the Moto Mount LT attached to the motorcycle handlebar?Updated 2 months ago
Installing the SP Connect Moto Mount Pro is quick and easy. The included reducer rings allow the mount to be adapted to different handlebar diameters.
Step-by-step instructions
1. Select the correct reducer ring
- Select the included reducer ring that matches the diameter of your motorcycle handlebar.
- For a handlebar diameter of 31.8 mm (1.25"), the clamp is mounted directly to the handlebar without a reducer ring.
2. Position the reducer ring
- Place the reducer ring at the desired position on the handlebar.
3. Install the clamp
- Place the clamp around the reducer ring or directly around the handlebar (for 31.8 mm).
4. Tighten the clamp
- Tighten the screws evenly and securely.
- Use a torque of 3 Nm to ensure secure installation.
Compatible handlebar diameters
- 22.2 mm (0.875")
- 25.4 mm (1")
- 27.0 mm (1.063")
- 28.6 mm (1.125")
- 31.8 mm (1.25")
Check the fit
- Make sure the Moto Mount Pro is firmly secured to the handlebar.
- Before every ride, check that the mount cannot twist or shift.
Summary
The SP Connect Moto Mount Pro is securely attached to the motorcycle handlebar using the appropriate reducer rings. For handlebars with a diameter of 31.8 mm (1.25"), the mount is installed without a reducer ring. Once tightened to 3 Nm, the Moto Mount Pro is ready for use.