How is the Moto Mount 3D 1½″ attached to the motorcycle handlebar?Updated 2 months ago
Installing the SP Connect Moto Mount 3D 1½″ is quick and easy. The supplied spacer allows the mount to be adapted to different handlebar diameters.
Step-by-step instructions
1. Select the appropriate spacer
- For a handlebar diameter of 31.8 mm, use the supplied spacer.
- For a handlebar diameter of 38.1 mm, the clamp is installed directly on the handlebar without the spacer. Before installation, apply the supplied 3M protective strip to the handlebar.
2. Position the spacer
- For a 31.8 mm handlebar, place the spacer at the desired position on the handlebar.
3. Install the clamp
- Place the clamp around the spacer or directly around the handlebar (for 38.1 mm).
4. Tighten the clamp
- Tighten the screws evenly and securely.
- Use a torque of 3 Nm to ensure secure installation.
Compatible handlebar diameters
- 31.8 mm (with spacer)
- 38.1 mm (without spacer, with 3M protective strip)
Check the installation
- Make sure the Moto Mount 3D 1½″ is firmly secured to the handlebar.
- Before every ride, check that the mount cannot rotate or shift on the handlebar.
Summary
The SP Connect Moto Mount 3D 1½″ is securely attached to a 31.8 mm handlebar using the supplied spacer. For a 38.1 mm handlebar, the mount is installed directly on the handlebar without the spacer, using the supplied 3M protective strip. Once the screws have been tightened to 3 Nm, the Moto Mount 3D 1½″ is ready for use.