How is the Handlebar Mount Pro MTB attached to the bicycle handlebar?Updated 8 hours ago
The installation of the SP Connect Handlebar Mount Pro MTB is quick and easy.
Step-by-step instructions
1. Select the appropriate reduction ring
- Choose the included reduction ring that matches your handlebar diameter
- For a handlebar diameter of 35 mm (1 3/8"), mount the clamp without a reduction ring directly onto the handlebar. In this case, use the included 3M adhesive strip to prevent scratches.
2. Position the reduction ring
- Place the reduction ring at the desired position on the handlebar
3. Mount the clamp
- Place the clamp around the reduction ring or directly around the handlebar (for 35 mm)
4. Tighten the clamp
- Tighten the screws evenly and securely
- Use a torque of 2.5 Nm to ensure safe installation
Compatible handlebar diameters
- 25.4 mm (standard ISO 1")
- 31.8 mm (oversized MTB & dropbar 1 1/4")
- 35 mm (1 3/8")
Check fit
- Ensure that the Handlebar Mount Pro MTB is firmly attached to the handlebar
- Before riding, check that the mount does not move
Result
The Handlebar Mount Pro MTB is securely attached to the handlebar and ready for use.