How is the Gravel Bike Mount Pro attached to the bicycle handlebar?Updated 2 months ago
Installing the SP-Connect Gravel Bike Mount Pro is quick and easy.
Step-by-step installation
1. Select the correct spacer ring
- Choose the included spacer ring that matches your handlebar diameter
- For a handlebar diameter of 35 mm (1 3/8"), mount the clamp without a spacer ring directly onto the handlebar. In this case, use the included 3M adhesive strip to prevent scratches.
2. Position the spacer ring
- Place the spacer ring at the desired position on the handlebar
3. Mount the clamp
- Place the clamp around the spacer ring or directly around the handlebar (for 35 mm)
4. Tighten the clamp
- Tighten the screws evenly and securely
- Use a torque of 2.5 Nm to ensure safe installation
Compatible handlebar diameters
- 25.4 mm (Standard ISO 1")
- 31.8 mm (Oversized MTB / Dropbar 1 1/4")
- 35 mm (1 3/8")
Check installation
- Ensure the Gravel Bike Mount Pro is firmly attached to the handlebar
- Before riding, check that the mount does not move
Result
The Gravel Bike Mount Pro is securely mounted to your handlebar and ready to use.