How is the Crossbar Mount Pro attached to the handlebar or cockpit crossbar?Updated 2 months ago
The SP Connect Crossbar Mount Pro is attached directly to the handlebar or cockpit crossbar of your motorcycle.
Depending on the diameter of the crossbar, the mount is installed either directly or using the included 12 mm reducer ring. The extension arm can then be adjusted individually to position your smartphone optimally within your field of view.
Step-by-step instructions
1. Select the correct clamp size
- For crossbars with a diameter of 11.5–12 mm, use the included 12 mm reducer ring.
- For crossbars with a diameter of 12–13 mm, install the mount without the reducer ring.
2. Install the mount
- Place the clamp around the handlebar or cockpit crossbar.
- Tighten the clamp screw evenly to a torque of 3 Nm.
3. Adjust the extension arm
- Loosen the screw on the extension arm.
- Adjust the extension arm so that your smartphone is positioned optimally within your field of view.
- Then retighten the screw to a torque of 3 Nm.
Check the fit
- Make sure that the Crossbar Mount Pro is firmly attached to the crossbar and cannot rotate.
- Check that both the clamp screw and the extension arm screw have been tightened to 3 Nm.
- Before every ride, check that the mount and your smartphone are securely attached.
Summary
The SP Connect Crossbar Mount Pro is attached to the handlebar or cockpit crossbar of your motorcycle using a clamp. Depending on the diameter of the crossbar, the included 12 mm reducer ring is used. The extension arm can then be individually adjusted and secured with a torque of 3 Nm, allowing you to position your smartphone optimally within your field of view.