How is the Bike Front Light 270 used in combination with the Wedge Case Set (Mag-Align)?Updated 25 days ago
Installing the SP Connect Bike Front Light 270 in combination with the SP Connect Wedge Case Set (Mag-Align) is quick and easy.
Installing the Wedge Case Set (Mag-Align)
1. Attach the mount to the bike
- Install the appropriate SP Connect mount on your bike.
- Make sure the mount is securely fastened.
2. Attach the Wedge Case Set
- Place the mechanism of the Wedge Case flat (completely) onto the mount.
- Rotate it by 90° until it locks securely into position.
The Wedge Case Set is now securely attached to the bike.
Installing the Bike Front Light 270
- Place the Bike Front Light 270 mechanism flat (completely) onto the front interface of the Wedge Case Set.
- Rotate the light by 90° until it securely locks into position.
Check the Fit
- Make sure that both the Wedge Case Set and the front light are firmly attached.
- Before riding, check that all components are properly locked in place.
Result
Your Wedge Case Set and Bike Front Light 270 are securely mounted and ready for use.
Further Information
Compatibility Note
If you are using an older Wedge Case with a light interface that still uses straight SPC rails, the Bike Front Light 270 is not directly compatible.
In this case, compatibility can be achieved using the SPC+ Adapter. This allows the Bike Front Light 270 to also be used with older Wedge Case versions.