How is the Ballhead Mount Pro attached to a RAM® mount?Updated 2 months ago

The SP Connect Ballhead Mount Pro is designed for installation on a RAM® mount with a standard 1" ball socket (25.4 mm).

The Ballhead Mount Pro is simply inserted into the clamping arm of the RAM® mount and then secured in the desired position.

Step-by-step instructions

1. Install the RAM® mount

• Install your RAM® mount on your motorcycle according to the manufacturer's instructions.
• Make sure that all components are firmly and securely installed.

2. Open the clamping arm

• Loosen the clamping lever or adjustment knob on your RAM® mount.
• Open the clamping arm far enough so that the ball socket is accessible.

3. Insert the Ballhead Mount Pro

• Insert the 1" ball (25.4 mm) of the Ballhead Mount Pro into the ball socket of the RAM® mount.
• Position the Ballhead Mount Pro at the desired angle.

4. Tighten the clamping arm

• Tighten the clamping lever or adjustment knob of the RAM® mount until the Ballhead Mount Pro is securely fixed in position.

Check the installation

• Make sure that the Ballhead Mount Pro can no longer move or rotate unintentionally.
• Before every ride, check that both the RAM® mount and the Ballhead Mount Pro are securely attached.

Summary

The SP Connect Ballhead Mount Pro is inserted into the 1" ball socket (25.4 mm) of a compatible RAM® mount. Once the desired position has been set, tighten the clamping arm of the RAM® mount to securely fix the Ballhead Mount Pro in place.