All articles

How do I use the Wireless Powerbank 5000mAh and what do the LEDs indicate?Updated a month ago

The SP-Connect Wireless Powerbank 5000mAh features four LED indicators that display the battery level and the charging status.

LED indicators

The three white LEDs indicate the current battery level of the powerbank.

  • 1 LED = Low battery level
  • 2 LEDs = Medium battery level
  • 3 LEDs = Powerbank fully charged

The fourth LED indicates the status of wireless charging.

  • Red: The powerbank is switched on, but wireless charging is not active.
  • Blue: The smartphone has been correctly positioned on the Wireless Powerbank and is charging wirelessly.

Wireless charging

  1. Press the power button once to switch on the Wireless Powerbank.
  2. The three white LEDs display the battery level, while the fourth LED lights up red.
  3. Attach your smartphone using a compatible SP Connect Phone Case.
  4. Once wireless charging starts, the fourth LED changes from red to blue.
  5. When you remove the smartphone, the LED changes back to red.
  6. To switch off the powerbank, press the power button twice.

Wired charging

  1. First attach your smartphone to the Wireless Powerbank.
  2. Connect the smartphone and the Wireless Powerbank using the supplied USB-C to USB-C cable.
  3. The powerbank switches on automatically and charging begins.
  4. During wired charging, the wireless charging status LED remains off.
  5. To switch off the powerbank, press the power button twice.

Charging the Wireless Powerbank

When the Wireless Powerbank itself is connected to a power source, only the three white LEDs indicate the charging status.

  • The LEDs flash while the powerbank is charging.
  • Depending on the charge level, one, two or three LEDs will be illuminated.
  • Once all three white LEDs remain continuously lit, the powerbank is fully charged.

Note: If a smartphone is attached while the Wireless Powerbank is connected to a power source, charging of the smartphone will not start automatically.

In this case, press the power button once to activate Pass-Through Charging.

Further information

For detailed operating instructions, please refer to the user manual:

  • Manual Wireless Powerbank 5000mAh

Summary

The three white LEDs indicate the battery level of the Wireless Powerbank 5000mAh, while the fourth LED shows the wireless charging status. The powerbank supports wireless charging, wired charging and Pass-Through Charging. Detailed operating instructions can be found in the user manual.

Was this article helpful?
Yes
No