How can I upgrade the Bike Computer Adapter WAH to the SP-Connect Mag-Align system?Updated a month ago
It is easily possible to upgrade the SPC+ Adapter of the SP-Connect Bike Computer Adapter WAH to the SP-Connect Mag-Align system.
This allows you to benefit from the magnetic guidance system when attaching your SP-Connect Phone Case to your Wahoo® bike mount.
Required Product
You will need the following product for the upgrade:
Please note: The Mag-Align Adapter is not included with the Bike Computer Adapter WAH and must be purchased separately.
Step-by-Step Instructions
1. Attach the Wahoo® mount
- Mount your Wahoo® mount to your bicycle
- Make sure the mount is firmly and securely attached
2. Attach the SPC+ Adapter to the Wahoo® mount
- Flip the centered lever of the SPC+ Adapter upward
- Place the adapter onto your Wahoo® mount so that the lever is aligned horizontally
- Rotate the adapter by 90° so that the lever is aligned vertically
- Flip the lever downward until it visibly and noticeably clicks into place
- The SPC+ Adapter is now firmly and securely connected to your Wahoo® mount
3. Attach the Mag-Align Adapter
- Place the Mag-Align Adapter flush (completely flat) onto the SPC+ Adapter interface
- Make sure the rails of the Mag-Align Adapter are aligned horizontally
- Rotate the Mag-Align Adapter by 90° until it noticeably clicks into place
Result
Your SP-Connect Phone Case can now be quickly and conveniently attached to your Wahoo® mount using the magnetic guidance of the Mag-Align system.
Additional Information
Please note: The included Wahoo® Adapter for mounting a Wahoo® bike computer onto an SP-Connect mount cannot be combined with the Mag-Align system.