How can I upgrade the Bike Computer Adapter GAR to the SP-Connect Mag-Align system?Updated a month ago
Yes. It is possible to upgrade the SPC+ Adapter of the SP-Connect Bike Computer Adapter GAR to the SP-Connect Mag-Align system.
This allows you to benefit from the magnetic guidance system when attaching your SP-Connect Phone Case to your GARMIN bike mount.
Required Product
You will need the following product for the upgrade:
Please note: The Mag-Align Adapter is not included with the Bike Computer Adapter GAR and must be purchased separately.
Step-by-Step Instructions
1. Attach the GARMIN mount
- Mount your GARMIN mount to your bicycle
- Make sure the mount is firmly and securely attached
2. Attach the SPC+ Adapter to the GARMIN mount
- Flip the centered lever of the SPC+ Adapter upward
- Place the adapter onto your GARMIN mount so that the lever is aligned horizontally
- Rotate the adapter by 90° so that the lever is aligned vertically
- Flip the lever downward until it visibly and noticeably clicks into place
- The SPC+ Adapter is now firmly and securely connected to your GARMIN mount
3. Attach the Mag-Align Adapter
- Place the Mag-Align Adapter flush (completely flat) onto the SPC+ Adapter interface
- Make sure the rails of the Mag-Align Adapter are aligned horizontally
- Rotate the Mag-Align Adapter by 90° until it noticeably clicks into place
Result
Your SP-Connect Phone Case can now be quickly and conveniently attached to your GARMIN mount using the magnetic guidance of the Mag-Align system.
Additional Information
Please note: The included GARMIN Adapter for mounting a GARMIN bike computer onto an SP-Connect mount cannot be combined with the Mag-Align system.