How can I upgrade my Moto Mount Pro to the SP Connect Mag-Align system?Updated 2 months ago
You can upgrade your SP Connect Moto Mount Pro to the SP Connect Mag-Align system using several different products.
All of the products listed below feature the SP Connect Mag-Align system. The magnetic guidance makes it easier to align your SP Connect Phone Case and allows for faster and more convenient attachment to the mount.
The following products can be used for the upgrade:
- Mag-Align Head A: Upgrades your Moto Mount Pro to the Mag-Align system.
- SP Connect Anti Vibration Module: Upgrades your Moto Mount Pro to the Mag-Align system while also reducing high-frequency motorcycle vibrations to help protect sensitive smartphone cameras.
- SP Connect Charging Anti Vibration Module: Offers the same vibration-reducing benefits as the Anti Vibration Module and additionally enables wireless charging of your smartphone while riding.
All three solutions can be installed either on the extension arm or, for a more compact setup, directly on the clamp of the Moto Mount Pro.
Installation on the extension arm
1. Remove the existing mounting head
- Loosen the Allen screw on the mounting head using the appropriate Allen key.
- Remove the existing mounting head completely from the extension arm.
- Important: Do not remove the sprocket adapter underneath, as it is required to install the new component.
2. Install the Mag-Align Head A
- Insert the Mag-Align Head A into the existing sprocket adapter on the extension arm.
- Position the mounting head as desired.
- Secure it using the screw included with the Mag-Align Head A.
- Tighten the screw to a torque of 3 Nm.
3. Install the Anti Vibration Module or Charging Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the existing sprocket adapter on the extension arm.
- Secure the module using the M5 × 16 mm screw included with the respective module.
- Tighten the screw to a torque of 3 Nm.
Compact installation directly on the clamp
1. Remove the extension arm
- Loosen the mounting screw securing the extension arm to the clamp.
- Remove the extension arm completely from the clamp.
- The sprocket ring on the clamp is now exposed.
2. Install the Sprocket Adapter
- Place the SP Connect Sprocket Adapter included with the Moto Mount Pro onto the exposed sprocket ring of the clamp.
3. Install the Mag-Align Head A
- Insert the Mag-Align Head A into the Sprocket Adapter.
- Position the mounting head as desired.
- Secure it using the screw included with the Mag-Align Head A.
- Tighten the screw to a torque of 3 Nm.
4. Install the Anti Vibration Module or Charging Anti Vibration Module
- Insert the Anti Vibration Module or Charging Anti Vibration Module into the Sprocket Adapter.
- Secure the module using the M5 × 16 mm screw included with the respective module.
- Tighten the screw to a torque of 3 Nm.
Check the installation
- Make sure all components are securely installed and cannot rotate unintentionally.
- Check that all screws have been tightened to the specified torque.
- Before every ride, check that the mount and smartphone are securely attached.
Summary
The SP Connect Moto Mount Pro can be upgraded to the SP Connect Mag-Align system using the Mag-Align Head A, SP Connect Anti Vibration Module or SP Connect Charging Anti Vibration Module.
All three products use magnetic guidance for faster and more convenient attachment of your SP Connect Phone Case. The Anti Vibration Module and Charging Anti Vibration Module additionally reduce high-frequency motorcycle vibrations to help protect sensitive smartphone cameras. The Charging Anti Vibration Module also enables wireless charging of your smartphone while riding.
The components can be installed either on the extension arm or directly on the clamp using the Sprocket Adapter included with the Moto Mount Pro.