How can I upgrade my Handlebar Mount Pro to the SP Connect Mag-Align system?Updated 7 days ago
You can upgrade your SP Connect Handlebar Mount Pro to the Mag-Align system.
For the upgrade, you will need the following item:
Step-by-step instructions
1. Remove the existing head
- Loosen the Allen screw on the mounting head using the included Allen key
- Remove the existing head completely from the mount
2. Insert the gear adapter
- Insert the serrated adapter included with the Mag-Align Head A into the mount
3. Install the Mag-Align Head A
- Insert the Mag-Align Head A into the serrated adapter
- Secure it with the included Allen screw
- Tighten the screw to a torque of 3 Nm
Check fit
- Make sure the new head is firmly installed and does not move
- Before use, check that all screws are properly tightened
Result
Your Handlebar Mount Pro is now upgraded to the Mag-Align system, enabling faster and more convenient use thanks to magnetic alignment.
Compatibility note
Please note that there exists an older version of the Handlebar Mount Pro which is not compatible with the Mag-Align Head A.
How to identify your version
1. Current version (compatible)
- There are 4 stamped holes at the front mounting point of the mount
- This version is compatible with the Mag-Align Head A
2. Older version (not compatible)
- There is a gear connection underneath the mounting head
- This version is not compatible with the Mag-Align Head A
Important for checking
- Remove the mounting head to identify your version
- The difference is only visible when the head is removed
Solution for older versions
If you have the older version (gear connection):
- Please contact our Customer Support
- We will provide you with a suitable solution
You can reach our support at:
[email protected]