Does the Stem Mount Pro have integrated damping?Updated 2 months ago
No. The SP-Connect Stem Mount Pro does not feature integrated damping by design.
However, the current version of the Stem Mount Pro can easily be upgraded with the following accessory to add effective shock absorption:
Please note: The Mag-Align Head A is not included with the Stem Mount Pro and must be purchased separately.
Benefits of the Mag-Align Head A
- Integrated shock absorption system within the mount head
- Damping through four specially developed elastomer elements
- Effectively reduces shocks and impacts from the road or terrain
- Provides additional protection for your smartphone, especially on rough surfaces
Additional benefit
- Magnetic guidance for faster and easier mounting of your SP-Connect Phone Case
Step-by-step instructions
1. Remove the existing head
- Loosen the Allen screw on the mount head of the Stem Mount Pro using the included Allen key
- Remove the existing head completely from the mount
2. Install the Mag-Align Head A
- First insert the included toothed adapter of the Mag-Align Head A into the mount
- Then place the Mag-Align Head A onto the adapter
- Secure it using the included Allen screw
- Tighten the screw to a torque of 3 Nm
Check fit
- Ensure all components are securely mounted
- Check before riding that nothing moves
Result
With the Mag-Align Head A, you upgrade your Stem Mount Pro with effective damping and benefit from a faster and more convenient user experience thanks to magnetic guidance.
Further information
Compatibility note
Please note that there is also an older version of the Stem Mount Pro which is not compatible with the Mag-Align Head A.
How to identify your version
1. Current version (compatible)
- There are four stamped holes at the front mounting interface
- This version is compatible with the Mag-Align Head A and therefore also with the Anti Vibration Module and Charging Anti Vibration Module
2. Older version (not compatible)
- There is a toothed interface under the mount head
- This version is not compatible with the Anti Vibration Module and Charging Anti Vibration Module
Important check
- Remove the mount head to identify the design
- The difference is only visible when the head is removed