Does the Handlebar Mount Pro have integrated damping?Updated 2 months ago
No. The SP Connect Handlebar Mount Pro does not feature integrated damping by design.
However, you can easily upgrade the current version of the Handlebar Mount Pro with the following accessory to add effective shock absorption:
Please note: The Mag-Align Head A is not included with the Handlebar Mount Pro and must be purchased separately.
Benefits of the Mag-Align Head A
- Integrated vibration and shock damping system in the mount head
- Damping via four specially developed rubber elements
- Effectively reduces vibrations and shocks from the road
- Provides additional protection for your smartphone, especially on rough terrain
Additional benefit
- Magnetic guidance for faster and easier mounting of your SP Connect Phone Case
Step-by-step guide
1. Remove the existing head
- Loosen the Allen screw on the mount head using the included Allen key
- Remove the existing head completely from the mount
2. Install the Mag-Align Head A
- First insert the included serrated adapter of the Mag-Align Head A into the mount
- Then place the Mag-Align Head A onto the adapter
- Fix it using the included Allen screw
- Tighten the screw with a torque of 3 Nm
Check installation
- Ensure the new head is firmly mounted and does not move
- Check before use that all screws are properly tightened
Result
With the Mag-Align Head A, you upgrade your Handlebar Mount Pro with effective damping and benefit from faster and more convenient handling thanks to magnetic guidance.
Further information
Compatibility note
Please note that there is also an older version of the Handlebar Mount Pro which is not compatible with the Mag-Align Head A.
How to identify your version
1. Current version (compatible)
- There are four stamped holes on the front mounting interface
- This version is compatible with the Mag-Align Head A and therefore also with the Anti Vibration Module and Charging Anti Vibration Module
2. Older version (not compatible)
- There is a toothed interface (gear connection) under the mounting head
- This version is not compatible with the Anti Vibration Module and the Charging Anti Vibration Module
Important for verification
- Remove the mounting head to identify your version
- The difference is only visible when the head is disassembled