Can I use the Moto Mount Pro without the arm, using only the clamp?Updated 2 months ago
Yes. The SP Connect Moto Mount Pro can also be used without the arm. For this setup, the included SP Connect Sprocket Adapter is mounted directly onto the clamp. This allows the mounting head to sit particularly compact and close to the handlebar.
Step-by-step instructions
1. Remove the mounting head
- Unscrew the mounting head from the arm of the Moto Mount Pro.
2. Remove the arm from the clamp
- Loosen the screw securing the arm to the clamp.
- Then remove the arm from the clamp.
- Also remove the height adapter underneath.
3. Install the Sprocket Adapter
- Place the Sprocket Adapter onto the sprocket ring of the clamp.
4. Attach the mounting head
- Insert the mounting head into the Sprocket Adapter.
- Tighten the mounting head to a torque of 3 Nm.
Check the fit
- Make sure that the mounting head is securely attached to the Sprocket Adapter.
- Before every ride, check that the mounting head cannot rotate or come loose.
Summary
The SP Connect Moto Mount Pro can also be used without the arm. To do this, the included Sprocket Adapter is mounted directly onto the clamp and the mounting head is then secured with a torque of 3 Nm. This provides a particularly compact setup directly on the handlebar.