Can I change the orientation of my smartphone on the Ballhead Mount Pro?Updated 2 months ago

Yes. With the SP Connect Ballhead Mount Pro, you can adjust the orientation and position of your smartphone at any time.

There are two ways to do this:

• Rotate the mounting head: The SP Connect mounting head can be rotated by 90° to switch between portrait and landscape orientation.
• Adjust the ball joint: By loosening the clamp of your RAM® Mount, you can position the Ballhead Mount Pro almost freely and adjust the height, tilt and viewing angle to suit your riding position.

Step-by-step instructions

1. Rotate the mounting head (portrait / landscape)

• Loosen the screw on the mounting head using a suitable Allen key.
• Rotate the mounting head by 90° to the desired position.
• Then retighten the screw to a torque of 3 Nm.

2. Adjust the ball joint

• Loosen the clamp of your RAM® Mount.
• Move the Ballhead Mount Pro into the desired position.
• Then securely retighten the clamp.

Check the installation

• Make sure that both the mounting head and the RAM® Mount are securely tightened.
• Then attach your smartphone to the mount using your SP Connect Phone Case.
• Before every ride, check that all connections and your smartphone are securely attached.

Summary

With the SP Connect Ballhead Mount Pro, you can use your smartphone in either portrait or landscape orientation and flexibly adjust its position using the ball joint. This allows you to position your smartphone optimally within your field of view at any time.