Can I change the orientation of my device on an SP Connect mount when using the Tablet Case Xtreme?Updated 16 days ago
With SP Connect mounts where the Tablet Case Xtreme is attached using the patented Twist-to-Lock system, changing the device orientation via the case itself is not possible.
To attach the case, the mechanism is placed onto the mount interface and then rotated by 90° into the locked position. Any further rotation—regardless of direction—will only unlock the case from the mount.
The Twist-to-Lock mechanism is therefore designed exclusively for secure locking and unlocking, not for adjusting orientation.
Switching between portrait and landscape mode is not possible via the Tablet Case Xtreme itself.
On most SP Connect Twist-to-Lock mounts, the orientation is adjusted directly on the mount:
The mount head can be rotated 360° and locked in precise 6° increments.
How to adjust the orientation:
Loosen the screw using the included tool.
Rotate the mount to the desired position.
Tighten the screw again.
This allows you to use your device in both portrait and landscape mode.
For tool-free repositioning, we recommend the Rotation Module, which is compatible with selected SP Connect mounts .
The Universal Mount can also be adjusted without tools.
Please note the following exceptions:
Handlebar Mount Pro / Stem Mount Pro : Only vertical or horizontal positioning is possible.
Aero Mount : No locking positions available.
Please note that with SP Connect mounts that do not use the Twist-to-Lock system but rely solely on magnetic attachment, tool-free orientation adjustment is possible.
With these magnetic mounts, the iPad can be positioned flexibly.
These mounts include: